Ground-Based Drone Detection at 10 m: Ninja Gen2 on the BlueSky Mast 200 Lift Series - AL2

Ground clutter blocks the signals a passive drone detector listens for. Raising the Ninja antenna array above it extends passive drone detection.

BlueSky Mast 200 Lift Series - AL2 tripod raising a Ninja Gen2 antenna array

What's in the Mission Kit

Mast

200 Lift Series - AL2 · 10 m
+
P/N

200H-W-L210-BSM-000

Height
10 m / 31.5 ft
Payload capacity
50 lb / 22.7 kg
Wind
70 mph
Team · setup
1 · 2–30 min
Testing
MIL-STD-810H
Transport
One custom 54 x 14 x 14 in wheeling carry bag; optional upgrade to a 62 x 21 x 14 in hard case.
Deployment
Fast Mechanical Lift System
Guying
Primary Guy Kit
Construction
Aerospace Aluminum Alloy · 2-inch outside diameter
Data sheet ↗

Payload

Ninja Gen2
+

Ninja Gen2 is a turnkey counter-small UAS (C-sUAS) system from Black River Systems Company. It uses an array of software-defined radios (SDRs) and an embedded computing system to intercept and decipher drone communication signals from 70 MHz to 6 GHz in real time. Ninja detects both the aircraft and the controller location, and it can whitelist friendly drones. It is made in the U.S. and is software upgradeable to keep pace with new threats.

Key Capabilities

  • Intercepts drone signals from 70 MHz to 6 GHz in real time
  • Locates both the aircraft and the controller
  • Simultaneous detection and defeat for swarm mitigation
  • Can hold a Group 1 or 2 sUAS in place, force a soft landing or re-route it
  • Full 360-degree protection that scales with more Ninja units
  • Whitelists friendly drones

Payload Contents

  • Ninja Gen2 antenna array (multi-band, GPS receiver, cables directly to the SDR/processor unit)
  • Ninja Gen2 SDR/processor unit
Visit Black River Systems Company ↗
Ninja TRx
+

Ninja TRx is a low-cost, lightweight range extension unit from Black River Systems Company. It is added to a Ninja Gen2 deployment to cover RF blind spots, tailor coverage and add swarm capability. A Ninja Gen2 is required for TRx deployments.

Key Capabilities

  • Effective against most UAS link types
  • Detection range identical to Ninja Gen2 (defeat range slightly reduced)
  • Covers RF blind spots
  • Keeps track updates running during active Ninja mitigation
  • Scalable swarm protection with more TRx units

Payload Contents

  • Ninja TRx unit
Visit Black River Systems Company ↗

Tech partner

Black River Systems Company
+

Black River Systems is the lead developer of the Air Force Research Laboratory’s Ninja C‑UAS family, a U.S.-made, software‑upgradeable system that detects, disrupts, and defeats small, unmanned aircraft without interfering with friendly systems.

Visit the partner page ↗
Line schematic of the 200 Lift Series - AL2 10 m model (31.5 ft), drawn to scale with height lines in feet

Next Steps

Configure Your Mission Kit

Tell us the payload and the mission. We'll configure the mast to carry it.